Technology and Operations
This forum is for discussing technological & operational matters pertaining to U-boats.
pressure dock
Posted by:
alper
()
Date: August 26, 2004 07:15PM
1. I need every information about PRESSURE DOCK which is used to make pressure tests of the submarines. ( without personel and diving!)
2. May I get the information about this dock and the application of making pressure tests of the submarines without personel and diving ?
3. Is that PRESSURE DOCK being used nowadays?
4. If it is being used, which types of submarines ( U 206, U 209, U212 etc. )
5 . Thank for your answers Sniper wrote:
> Folks,
>
> The info i have on the Type VII pressure hull is as
> follows:
>
> VII A,B,C
>
> Operational 100 meters
> Crush 200 meters
>
> Pressure Hull plating was 18.5mm 52KM steel
>
> VIIC/41
>
> Operational 120 meters
> Crush 250 meters
>
> Pressure Hull plating was 21mm 52KM steel
>
> VIIC/42
>
> Operational 200 meters
> Crush 500 meters
>
> Pressure hull plating was 28mm CM 351 steel.
2. May I get the information about this dock and the application of making pressure tests of the submarines without personel and diving ?
3. Is that PRESSURE DOCK being used nowadays?
4. If it is being used, which types of submarines ( U 206, U 209, U212 etc. )
5 . Thank for your answers Sniper wrote:
> Folks,
>
> The info i have on the Type VII pressure hull is as
> follows:
>
> VII A,B,C
>
> Operational 100 meters
> Crush 200 meters
>
> Pressure Hull plating was 18.5mm 52KM steel
>
> VIIC/41
>
> Operational 120 meters
> Crush 250 meters
>
> Pressure Hull plating was 21mm 52KM steel
>
> VIIC/42
>
> Operational 200 meters
> Crush 500 meters
>
> Pressure hull plating was 28mm CM 351 steel.