Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
dimensions
Posted by:
jim kippola
()
Date: April 12, 2001 12:46AM
Can anybody provide me with the following dimensions for a type nine?
1. The diameter of the hatch tube from the control room to the bridge. This is the passage containing the ladder.
2. The distance between the ribs (the round i-beam like rings )which support the pressure hull.Distance being measured in the control room.Specific rib dimentions would also be helpfull.Thanks in advance for any help! Jim
1. The diameter of the hatch tube from the control room to the bridge. This is the passage containing the ladder.
2. The distance between the ribs (the round i-beam like rings )which support the pressure hull.Distance being measured in the control room.Specific rib dimentions would also be helpfull.Thanks in advance for any help! Jim
Subject | Written By | Posted |
---|---|---|
dimensions | jim kippola | 04/12/2001 12:46AM |
RE: dimensions | Rainer Bruns | 04/12/2001 12:59PM |