Technology and Operations
This forum is for discussing technological & operational matters pertaining to U-boats.
Re: torpedo design query
Posted by:
ROBERT M.
()
Date: August 14, 2004 07:25PM
Keith:
First of all there is no trajectory to a torpedo..........
It is a self-propelled weapon (automobile torpedo) that maintains a preset depth and a gyro-controlled course to the target.
Inside the U.S. Navy's MK 13 (aerial) MK 14 (submarine) and MK15 (surface craft) torpedoes, there is a gear train (main engine)
made up of a spindle casing with an upper, middle, and lower
bearing. These brearings have an inner and outer race. The steel
balls for each bearing are hand-placed (individually) into these machined races, and tightened to exact clearances. The inner and outer counter-rotating shafts use floating grooved bronze
bushings at the crosshead, as do the inner and outer propellor shafts in the tail section.
You can get an idea of what I'm talking about by going to:
[www.eugeneleeslover.com]
[www.eugeneleeslover.com]
All three aforementioned torpedoes use a similar gear train, bearings, bronze bushings and sleeves.
Hope this helps,
ROBERT M.
First of all there is no trajectory to a torpedo..........
It is a self-propelled weapon (automobile torpedo) that maintains a preset depth and a gyro-controlled course to the target.
Inside the U.S. Navy's MK 13 (aerial) MK 14 (submarine) and MK15 (surface craft) torpedoes, there is a gear train (main engine)
made up of a spindle casing with an upper, middle, and lower
bearing. These brearings have an inner and outer race. The steel
balls for each bearing are hand-placed (individually) into these machined races, and tightened to exact clearances. The inner and outer counter-rotating shafts use floating grooved bronze
bushings at the crosshead, as do the inner and outer propellor shafts in the tail section.
You can get an idea of what I'm talking about by going to:
[www.eugeneleeslover.com]
[www.eugeneleeslover.com]
All three aforementioned torpedoes use a similar gear train, bearings, bronze bushings and sleeves.
Hope this helps,
ROBERT M.
Subject | Written By | Posted |
---|---|---|
torpedo design query | Keith | 08/14/2004 02:45PM |
Re: torpedo design query | Les Robertson | 08/14/2004 05:10PM |
Re: torpedo design query | ROBERT M. | 08/14/2004 07:25PM |
Re: torpedo design query | Tom Ramsay | 10/01/2004 04:53AM |
Re: torpedo design query | Keith | 08/15/2004 08:33AM |
Re: torpedo design query | ROBERT M. | 08/15/2004 02:19PM |
Re: torpedo design query | Les Robertson | 08/16/2004 05:42AM |
Re: torpedo design query | Keith | 08/17/2004 02:13PM |
Re: torpedo design query | Natter | 08/28/2011 06:32PM |
Re: torpedo design query | Natter | 03/23/2013 10:19PM |