Technology and Operations
This forum is for discussing technological & operational matters pertaining to U-boats.
Re: Use of metals in U boat pressure hulls
Posted by:
Simon
()
Date: March 16, 2013 07:10PM
I am not sure about the Type IX but on the Type VIIC the pressure hull is between 16 mm and 18.5 mm. Its 16 mm at both the bow and stern casting and 18.5 mm around the CT.
Unsure if all the steel on the Type VIIC/41 is the same 21 mm.
Unsure if all the steel on the Type VIIC/41 is the same 21 mm.
Subject | Written By | Posted |
---|---|---|
Use of metals in U boat pressure hulls | wreckferret | 03/16/2013 06:51PM |
Re: Use of metals in U boat pressure hulls | Simon | 03/16/2013 07:10PM |
Re: Use of metals in U boat pressure hulls | SnakeDoc | 03/17/2013 07:40PM |
Re: Use of metals in U boat pressure hulls | Scott Sorenson | 03/18/2013 12:43AM |
Re: Use of metals in U boat pressure hulls | zakarpatska | 03/18/2013 12:55PM |