Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
RE: Merchandising Rights?
Posted by:
Rainer Bruns
()
Date: August 16, 2001 01:25PM
Hi Mike,
1) these boats are not mine, but from a young German friend of mine for whom I am doing the marketing until he is fully established.
2) these are individually handmade fiberglass hulls (as opposed to mass cast polyresin like in Revell). Working flat out and allowing for proper curing in the molds, he will not produce more than 4-6 hulls a month.
3) these are 1:40 models intended for R/C operation, thus a little too big for your average bookshelf static display. An injection moulded cast resin model in 1:96 or 1:100 would be the kit for that. Unfortunately nobody seems to make it. Rgds, RB
1) these boats are not mine, but from a young German friend of mine for whom I am doing the marketing until he is fully established.
2) these are individually handmade fiberglass hulls (as opposed to mass cast polyresin like in Revell). Working flat out and allowing for proper curing in the molds, he will not produce more than 4-6 hulls a month.
3) these are 1:40 models intended for R/C operation, thus a little too big for your average bookshelf static display. An injection moulded cast resin model in 1:96 or 1:100 would be the kit for that. Unfortunately nobody seems to make it. Rgds, RB
Subject | Written By | Posted |
---|---|---|
Merchandising Rights? | Mike | 08/16/2001 04:23AM |
RE: Merchandising Rights? | Rainer Bruns | 08/16/2001 11:44AM |
RE: Merchandising Rights? | Mike | 08/16/2001 12:00PM |
RE: Merchandising Rights? | Rainer Bruns | 08/16/2001 01:25PM |
RE: Merchandising Rights? | I Stapley | 08/28/2001 10:37AM |