Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
RE: Adhesives
Posted by:
Jerry Pope
()
Date: October 22, 2000 12:09PM
Hi Max:
I have found a aviation / marine grade
adhesive that will do the job. It is called "T-88".
The product thickness is about the same as regular epoxy and a lot
thicker than the epoxy you use for fiberglass work. You can use it
down to 35 degrees F.. It is the most widely used structural adhesive
for marine, homebuilt aircraft, and general woodworking use in the
United States for the past 20 years. It will also cure in high
humidity. I've done some pull test on different materials ie...
brass, aluminum, epoxy/fiberglass, styrene, wood... and it works
better than everything else that I have tried. I have not tried
Stabilit Express, so I don't know if T-88 is better. I ordered mine
($17.00 usd for a pint kit) directly from the factory to insure
freshness, their address is as follows:
System Three Resins, Inc.
Suite 105, 3500 West Valley Hwy, N.
Auburn, WA 98001
Phone: 1 800 333-5514
website: [www.systemthree.com]
Good Luck and Good Hunting,
Jerry Pope
I have found a aviation / marine grade
adhesive that will do the job. It is called "T-88".
The product thickness is about the same as regular epoxy and a lot
thicker than the epoxy you use for fiberglass work. You can use it
down to 35 degrees F.. It is the most widely used structural adhesive
for marine, homebuilt aircraft, and general woodworking use in the
United States for the past 20 years. It will also cure in high
humidity. I've done some pull test on different materials ie...
brass, aluminum, epoxy/fiberglass, styrene, wood... and it works
better than everything else that I have tried. I have not tried
Stabilit Express, so I don't know if T-88 is better. I ordered mine
($17.00 usd for a pint kit) directly from the factory to insure
freshness, their address is as follows:
System Three Resins, Inc.
Suite 105, 3500 West Valley Hwy, N.
Auburn, WA 98001
Phone: 1 800 333-5514
website: [www.systemthree.com]
Good Luck and Good Hunting,
Jerry Pope
Subject | Written By | Posted |
---|---|---|
Adhesives | Max | 10/21/2000 01:56AM |
RE: Adhesives | joe brandt | 10/21/2000 02:58PM |
RE: Adhesives | Max | 10/21/2000 08:27PM |
RE: Adhesives | Jerry Pope | 10/22/2000 12:09PM |
RE: Adhesives | Max | 10/22/2000 06:22PM |