Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Ballast Pumps
Posted by:
Will King
()
Date: February 08, 2001 10:59AM
Hello again, everyone.
I am trying to figure out what everyone is using for ballast pumps, and looking for recommendations on what I should use in my 32P Type VII and where to get them. I have tried the SubCommittee Board and they don\'t seem to be too eager to help.
I have 2 ballast tanks (1.16 Gal and 1.21 Gal), fore and aft, which are vented with a ball valve and some other goodies into the Pressure hull.
Your help here is, as always, greatly appreciated. Thanks in advance.
Will King
I am trying to figure out what everyone is using for ballast pumps, and looking for recommendations on what I should use in my 32P Type VII and where to get them. I have tried the SubCommittee Board and they don\'t seem to be too eager to help.
I have 2 ballast tanks (1.16 Gal and 1.21 Gal), fore and aft, which are vented with a ball valve and some other goodies into the Pressure hull.
Your help here is, as always, greatly appreciated. Thanks in advance.
Will King
Subject | Written By | Posted |
---|---|---|
Ballast Pumps | Will King | 02/08/2001 10:59AM |
RE: Ballast Pumps | Jerry Pope | 02/08/2001 04:23PM |
RE: Ballast Pumps | Jeffrey LaRue | 02/08/2001 06:49PM |
RE: Ballast Pumps | Will King | 02/08/2001 11:42PM |
RE: Ballast Pumps | Malcolm Cowie | 02/09/2001 04:40AM |
RE: Ballast Pumps | Rainer Bruns | 02/09/2001 05:34AM |
RE: Ballast Pumps | Malcolm Cowie | 02/09/2001 05:33PM |
RE: Ballast Pumps | kevin | 02/17/2001 03:50PM |
RE: Ballast Pumps | joe brandt | 02/17/2001 08:10PM |
RE: Ballast Pumps | Will King | 02/17/2001 08:49PM |
RE: Ballast Pumps | kevin | 02/19/2001 12:59PM |
RE: Ballast Pumps | Jeffrey LaRue | 02/09/2001 02:50PM |
RE: Ballast Pumps | m cowie | 02/09/2001 05:32PM |
RE: Ballast Pumps | joe brandt | 02/10/2001 08:57PM |
RE: Ballast Pumps | Will King | 02/17/2001 08:52PM |