Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: Radio Aerial wires
Posted by:
Don Prince
()
Date: February 01, 2009 12:32AM
Hi Simon,
Send me an email and I will send you some photos of my OTW Type VIIc with a brass deck and tower. OTW has the locations of the antennae wires anchors at the bow and stern.
dprince004@sc.rr.com
The first barss sheet:
This page shows the slots above the doors that open outward. There is an half eye type anchor that is soldered into the brass deck plate slots. The three plates are soldered onto a brass base plate.
[www.otwdesigns.com]
Regards,
Don_
"A man's got to know his limitations..."
Harry Callahan, SFPD
Send me an email and I will send you some photos of my OTW Type VIIc with a brass deck and tower. OTW has the locations of the antennae wires anchors at the bow and stern.
dprince004@sc.rr.com
The first barss sheet:
This page shows the slots above the doors that open outward. There is an half eye type anchor that is soldered into the brass deck plate slots. The three plates are soldered onto a brass base plate.
[www.otwdesigns.com]
Regards,
Don_
"A man's got to know his limitations..."
Harry Callahan, SFPD
Subject | Written By | Posted |
---|---|---|
Radio Aerial wires | Simon | 01/27/2009 11:18PM |
Re: Radio Aerial wires | Don Prince | 02/01/2009 12:32AM |