Modeling and schematics
Jason,
If you really want to keep the cost down, try making your own plug out of balsa wood. Local hobby shop sell 4x4x36 inch balsa for $12 here, then shape it( to make it wider just add balsa sheets to the side and use probond ( sandable) Then use fiberglass or carbon cloth and coat with fiberglass. This process will take u some time but it will keep the cost down ( about $60 plus your time)
I did this for a friend back in the 80's, made the hull for him and he made the deck from basswood then coated with fiberglass no cloth.
Total cost was about $140 just for the Sub.( 4 feet long)
Hope this helps you and best of luck.
Mike Holbrook
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: Model Boat selection help
Posted by:
Mike Holbrook
()
Date: June 29, 2002 11:54PM
Jason,
If you really want to keep the cost down, try making your own plug out of balsa wood. Local hobby shop sell 4x4x36 inch balsa for $12 here, then shape it( to make it wider just add balsa sheets to the side and use probond ( sandable) Then use fiberglass or carbon cloth and coat with fiberglass. This process will take u some time but it will keep the cost down ( about $60 plus your time)
I did this for a friend back in the 80's, made the hull for him and he made the deck from basswood then coated with fiberglass no cloth.
Total cost was about $140 just for the Sub.( 4 feet long)
Hope this helps you and best of luck.
Mike Holbrook
Subject | Written By | Posted |
---|---|---|
Model Boat selection help | Jason | 06/29/2002 12:36AM |
Re: Model Boat selection help | Rainer Bruns | 06/29/2002 01:16AM |
Re: Model Boat selection help | Mike Holbrook | 06/29/2002 11:54PM |
Re: Model Boat selection help | Tim Senecal | 08/14/2002 06:03PM |