Modeling and schematics  
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas. 
Go to: Forum List•Message List•New Topic•Search•Log In•Print View
Re: Model Boat selection help
Posted by: Mike Holbrook ()
Date: June 29, 2002 11:54PM



Jason,

If you really want to keep the cost down, try making your own plug out of balsa wood. Local hobby shop sell 4x4x36 inch balsa for $12 here, then shape it( to make it wider just add balsa sheets to the side and use probond ( sandable) Then use fiberglass or carbon cloth and coat with fiberglass. This process will take u some time but it will keep the cost down ( about $60 plus your time)

I did this for a friend back in the 80's, made the hull for him and he made the deck from basswood then coated with fiberglass no cloth.

Total cost was about $140 just for the Sub.( 4 feet long)

Hope this helps you and best of luck.

Mike Holbrook

Options: Reply•Quote


Subject Written By Posted
Model Boat selection help Jason 06/29/2002 12:36AM
Re: Model Boat selection help Rainer Bruns 06/29/2002 01:16AM
Re: Model Boat selection help Mike Holbrook 06/29/2002 11:54PM
Re: Model Boat selection help Tim Senecal 08/14/2002 06:03PM


Go to: Forum List•Message List•Search•Log In
Your Name: 
Subject: 
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
  ******   ********  **    **  **     **  ******** 
 **    **  **        ***   **  **     **     **    
 **        **        ****  **  **     **     **    
 **        ******    ** ** **  **     **     **    
 **        **        **  ****   **   **      **    
 **    **  **        **   ***    ** **       **    
  ******   **        **    **     ***        **