Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: Help with pressure regulator
Posted by:
Grant Goodale
()
Date: May 19, 2003 09:40PM
Einsamer -
Sounds like a lemon to me.
There is one thing that you can try to see if there is leakage. Mix up a strong solution of liquid dish detergent and water and paint it over the various joints. If it is leaking you should see bubbles.
Be sure that you keep that solution away from the electrical parts :-)
HTH
- Grant
Sounds like a lemon to me.
There is one thing that you can try to see if there is leakage. Mix up a strong solution of liquid dish detergent and water and paint it over the various joints. If it is leaking you should see bubbles.
Be sure that you keep that solution away from the electrical parts :-)
HTH
- Grant
Subject | Written By | Posted |
---|---|---|
Help with pressure regulator | Einsamer Wolf | 05/14/2003 01:42PM |
Re: Help with pressure regulator | Grant Goodale | 05/19/2003 09:40PM |
Re: Help with pressure regulator | J. Brennan | 05/28/2003 05:45AM |