Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: Revel 1/72 U- Boat - Help and opinions wanted
Posted by:
Dougie
()
Date: March 02, 2006 01:05AM
Hi James,
You might have to order from the states. As far as I know Hannants, Pandan models and White Ensign don't do the Modelbrass set.
I would recommend the first Warhammer Productions resin set (WH001). I would say that this set enhances the kit more than the WEM PE set. You can see this set by going to the following address and pressing WH001 -
[www.horiginal.com.br]
I notice that there is going to be another resin set from Warhammer (WH006) which will upgrade the 88mm, sonar and rear torpedo exit. See at -
[www.perthmilitarymodelling.com]
Cheers,
Dougie
You might have to order from the states. As far as I know Hannants, Pandan models and White Ensign don't do the Modelbrass set.
I would recommend the first Warhammer Productions resin set (WH001). I would say that this set enhances the kit more than the WEM PE set. You can see this set by going to the following address and pressing WH001 -
[www.horiginal.com.br]
I notice that there is going to be another resin set from Warhammer (WH006) which will upgrade the 88mm, sonar and rear torpedo exit. See at -
[www.perthmilitarymodelling.com]
Cheers,
Dougie
Subject | Written By | Posted |
---|---|---|
Revel 1/72 U- Boat - Help and opinions wanted | James Goddard | 02/28/2006 09:53PM |
Re: Revel 1/72 U- Boat - Help and opinions wanted | Jess | 03/01/2006 02:05AM |
Re: Revel 1/72 U- Boat - Help and opinions wanted | James Goddard | 03/01/2006 04:30PM |
Re: Revel 1/72 U- Boat - Help and opinions wanted | Dougie | 03/02/2006 01:05AM |
Re: Revel 1/72 U- Boat - Help and opinions wanted | Dougie | 03/02/2006 03:14PM |