Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: Lower flood vents on diving tanks 2 & 3 - Type VII
Posted by:
SnakeDoc
()
Date: August 04, 2011 02:58PM
Hi
OsmiumSteele Wrote:
-------------------------------------------------------
> A couple questions:
>
> Did Uboats usually run with these open when
> submerged? How did they open? Did they slide,
> hinged at the top or bottom, etc.?
When these tanks were used as fuel oil tanks, the flood
valves were kept closed.
When tanks were used as ballast tanks, they were kept opened.
For flood valves details see:
[img705.imageshack.us]
(source: uboatarchive.net)
--
Regards
Maciek
[www.tvre.org]
OsmiumSteele Wrote:
-------------------------------------------------------
> A couple questions:
>
> Did Uboats usually run with these open when
> submerged? How did they open? Did they slide,
> hinged at the top or bottom, etc.?
When these tanks were used as fuel oil tanks, the flood
valves were kept closed.
When tanks were used as ballast tanks, they were kept opened.
For flood valves details see:
[img705.imageshack.us]
(source: uboatarchive.net)
--
Regards
Maciek
[www.tvre.org]
Subject | Written By | Posted |
---|---|---|
Lower flood vents on diving tanks 2 & 3 - Type VII | OsmiumSteele | 08/03/2011 01:57PM |
Re: Lower flood vents on diving tanks 2 & 3 - Type VII | OsmiumSteele | 08/04/2011 02:01PM |
Re: Lower flood vents on diving tanks 2 & 3 - Type VII | SnakeDoc | 08/04/2011 02:58PM |
Re: Lower flood vents on diving tanks 2 & 3 - Type VII | OsmiumSteele | 08/04/2011 06:18PM |
Re: Lower flood vents on diving tanks 2 & 3 - Type VII | SnakeDoc | 08/12/2011 09:22AM |
Re: Lower flood vents on diving tanks 2 & 3 - Type VII | OsmiumSteele | 08/16/2011 06:41PM |
Re: Lower flood vents on diving tanks 2 & 3 - Type VII | OsmiumSteele | 08/26/2011 01:32PM |