Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: VIIC turm exact position on deck?
Posted by:
hans witteman
()
Date: June 21, 2012 02:42PM
Hi Maciek,
Finally after verifying all my plans in photoshop i found out i probably scale my plan non uniformly by mistake in my 3d software.
In photoshop the Revell plan are perfectly matching the Rossler plan the only faulty one is not a plan but a Trojca drawing showing the conning tower toward the stern.
But i still see some error in deck plan from top like the deck gun not correctly space with the Gyro fairing.
Best regards Hans
Finally after verifying all my plans in photoshop i found out i probably scale my plan non uniformly by mistake in my 3d software.
In photoshop the Revell plan are perfectly matching the Rossler plan the only faulty one is not a plan but a Trojca drawing showing the conning tower toward the stern.
But i still see some error in deck plan from top like the deck gun not correctly space with the Gyro fairing.
Best regards Hans
Subject | Written By | Posted |
---|---|---|
![]() |
hans witteman | 06/20/2012 01:58AM |
![]() |
SnakeDoc | 06/20/2012 01:38PM |
![]() |
hans witteman | 06/21/2012 12:49AM |
![]() |
SnakeDoc | 06/21/2012 09:37AM |
![]() |
hans witteman | 06/21/2012 02:42PM |
![]() |
SnakeDoc | 06/22/2012 09:11AM |
![]() |
hans witteman | 06/23/2012 03:10PM |
![]() |
SnakeDoc | 06/25/2012 12:39PM |
![]() |
SnakeDoc | 06/25/2012 12:48PM |
![]() |
hans witteman | 06/26/2012 05:35AM |
![]() |
hans witteman | 06/26/2012 05:32AM |
![]() |
SnakeDoc | 06/26/2012 09:43AM |
![]() |
hans witteman | 06/26/2012 05:17PM |