Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: VIIC turm exact position on deck?
Posted by:
SnakeDoc
()
Date: June 26, 2012 09:43AM
Hi Hans
hans witteman Wrote:
-------------------------------------------------------
> For some reason they probably make some slight
> change to the position of the gun mount to adjust
> with the breakwave deflection factor, this is only
> my own opinion of course.
I think, that it is unlikely, that the gun mounting location was
changed - it would led to change of the center of gravity of the boat
(relatively large weight of the gun fundament, mounting and gun itself),
and consequently to change of the trim characteristics.
But is is my personal opinion and I have no data to support it.
--
Regards
Maciek
[www.tvre.org]
hans witteman Wrote:
-------------------------------------------------------
> For some reason they probably make some slight
> change to the position of the gun mount to adjust
> with the breakwave deflection factor, this is only
> my own opinion of course.
I think, that it is unlikely, that the gun mounting location was
changed - it would led to change of the center of gravity of the boat
(relatively large weight of the gun fundament, mounting and gun itself),
and consequently to change of the trim characteristics.
But is is my personal opinion and I have no data to support it.
--
Regards
Maciek

[www.tvre.org]
Subject | Written By | Posted |
---|---|---|
![]() |
hans witteman | 06/20/2012 01:58AM |
![]() |
SnakeDoc | 06/20/2012 01:38PM |
![]() |
hans witteman | 06/21/2012 12:49AM |
![]() |
SnakeDoc | 06/21/2012 09:37AM |
![]() |
hans witteman | 06/21/2012 02:42PM |
![]() |
SnakeDoc | 06/22/2012 09:11AM |
![]() |
hans witteman | 06/23/2012 03:10PM |
![]() |
SnakeDoc | 06/25/2012 12:39PM |
![]() |
SnakeDoc | 06/25/2012 12:48PM |
![]() |
hans witteman | 06/26/2012 05:35AM |
![]() |
hans witteman | 06/26/2012 05:32AM |
![]() |
SnakeDoc | 06/26/2012 09:43AM |
![]() |
hans witteman | 06/26/2012 05:17PM |