RE: Evacuate valve
Posted by:
Rainer Bruns
()
Date: January 12, 2001 04:16PM
No problem, Robert, the answer is quite simple:
Let\'s say you have 2 DP tanks P&S, 1/2 full of oil ea. You transfer all oil incl. emulsified boundary layer from P to S or vice-versa. So S tank is full of oil. Then you fill the P tank to 91% level with seawater. Oil spec. grav. vs. SW = .91.
Voila, equilibrium has been reestablished. Rgds, RB
Let\'s say you have 2 DP tanks P&S, 1/2 full of oil ea. You transfer all oil incl. emulsified boundary layer from P to S or vice-versa. So S tank is full of oil. Then you fill the P tank to 91% level with seawater. Oil spec. grav. vs. SW = .91.
Voila, equilibrium has been reestablished. Rgds, RB
| Subject | Written By | Posted |
|---|---|---|
Evacuate valve
|
Fissi | 01/07/2001 01:57PM |
|
RE: Evacuate valve
|
Enrique | 01/07/2001 04:41PM |
|
RE: Evacuate valve
|
Rainer Bruns | 01/07/2001 05:02PM |
|
RE: Evacuate valve
|
Enrique | 01/07/2001 05:19PM |
|
RE: Evacuate valve CORRECTION
|
Enrique | 01/07/2001 05:22PM |
|
RE: Evacuate valve
|
Rainer Bruns | 01/07/2001 09:15PM |
|
RE: Evacuate valve
|
Fissi | 01/07/2001 09:38PM |
|
RE: Evacuate valve
|
Rainer Bruns | 01/08/2001 12:36AM |
|
RE: Evacuate valve
|
Robert Eno | 01/08/2001 04:59AM |
|
RE: Evacuate valve
|
Rainer Bruns | 01/08/2001 04:58PM |
|
RE: Evacuate valve
|
Don Baker | 01/09/2001 05:58PM |
|
RE: Evacuate valve
|
Robert Eno | 01/12/2001 03:30AM |
|
RE: Evacuate valve
|
Rainer Bruns | 01/12/2001 04:16PM |
|
RE: Evacuate valve
|
Robert Eno | 01/13/2001 05:46PM |
|
RE: Evacuate valve
|
Enrique | 01/08/2001 06:23PM |
|
RE: Evacuate valve
|
Rainer Bruns | 01/08/2001 09:31PM |