Technology and Operations
This forum is for discussing technological & operational matters pertaining to U-boats.
Re: Torpedo turn radius and TDC
Posted by:
Natter
()
Date: August 27, 2011 05:30PM
Don Reed Wrote:
-------------------------------------------------------
> Based on the speed of 5 and/or 7 knots during the
> turns leads me to believe the 18 m turing radius
> is correct for the G7a and G7e right out of the
> Rohr.
A G7a has - as stated in other posts - a turning radius of ca. 90 metres at 30 kn. I'm not sure about the G7e, but it would for sure not be any better (having the rudder in front of the propeller would mean slighly less effiency).
The turning radius would be larger just after launch, as the torpedoengine is running with reduced power, and the effect of the rudders are not optimal.
-------------------------------------------------------
> Based on the speed of 5 and/or 7 knots during the
> turns leads me to believe the 18 m turing radius
> is correct for the G7a and G7e right out of the
> Rohr.
A G7a has - as stated in other posts - a turning radius of ca. 90 metres at 30 kn. I'm not sure about the G7e, but it would for sure not be any better (having the rudder in front of the propeller would mean slighly less effiency).
The turning radius would be larger just after launch, as the torpedoengine is running with reduced power, and the effect of the rudders are not optimal.
Subject | Written By | Posted |
---|---|---|
Torpedo turn radius and TDC | Leif... | 04/02/2002 06:20AM |
Re: Torpedo turn radius and TDC | Don Reed | 04/15/2002 10:26PM |
Re: Torpedo turn radius and TDC | Leif... | 04/16/2002 02:58PM |
Re: Torpedo turn radius and TDC | Don Reed | 04/18/2002 11:03AM |
Re: Torpedo turn radius and TDC | Don Reed | 04/18/2002 04:19PM |
Re: Torpedo turn radius and TDC | Leif... | 04/19/2002 07:00AM |
Re: Torpedo turn radius and TDC | Don Reed | 04/20/2002 02:38PM |
Re: Torpedo turn radius and TDC | Leif... | 04/21/2002 04:34PM |
Re: Torpedo turn radius and TDC | Don Reed | 04/26/2002 10:35AM |
Re: Torpedo turn radius and TDC | Don Reed | 04/26/2002 11:41AM |
Re: Torpedo turn radius and TDC | Natter | 08/27/2011 05:30PM |