Technology and Operations
This forum is for discussing technological & operational matters pertaining to U-boats.
Re: lathes onboard u boats??
Posted by:
Scott Sorenson
()
Date: February 14, 2018 05:08PM
Bedge;
I was thinking of a drill press. See what happens when you get old. Here is the information I found about the lathe onboard.
Lathe
This is an electrically driven fixed unit.Six speeds of operation are provided, and the unit is suitable for face turning, longitudinal turning and thread cutting. A hollow head stock permits work on long pieces of material which could not otherwise be gotten into the machine.
I was thinking of a drill press. See what happens when you get old. Here is the information I found about the lathe onboard.
Lathe
This is an electrically driven fixed unit.Six speeds of operation are provided, and the unit is suitable for face turning, longitudinal turning and thread cutting. A hollow head stock permits work on long pieces of material which could not otherwise be gotten into the machine.
Subject | Written By | Posted |
---|---|---|
![]() |
bedge | 02/14/2018 01:09PM |
![]() |
Scott Sorenson | 02/14/2018 03:50PM |
![]() |
Scott Sorenson | 02/14/2018 05:08PM |
![]() |
bedge | 02/15/2018 12:07AM |
![]() |
bedge | 02/14/2018 09:47PM |
![]() |
Scott Sorenson | 02/15/2018 03:36PM |
![]() |
bedge | 02/27/2018 03:05PM |