Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
RE: Air pump
Posted by:
joe brandt
()
Date: July 11, 2000 12:47AM
Most people that go this route use a car tire compressor. This uses 12volts and can be found in any care parts store and is very cheap. To fit inside the boat the outside case is removed and made to fit inside the boat. Remember for this type of system you will need an air mast and be at periscope depth to draw in the air. This use can be found in an back issue of the subcomittee report. If you want more info e-mail me and i will try to find this back issue for you.
Subject | Written By | Posted |
---|---|---|
Air pump | Francois Guinand | 07/10/2000 08:15PM |
RE: Air pump | joe brandt | 07/11/2000 12:47AM |
RE: Air pump | Frank Ricucci | 07/11/2000 02:38PM |
RE: Air pump | Clemens Liegler | 07/11/2000 06:32PM |
RE: Air pump | Francois Guinand | 07/11/2000 07:56PM |
RE: Air pump | Francois Guinand | 07/11/2000 08:05PM |
RE: Air pump | Frank Ricucci | 07/12/2000 11:26AM |
RE: Air pump | John | 08/06/2000 02:07PM |