Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Re: maybe a silly question ....
Posted by:
Rainer Bruns
()
Date: July 17, 2002 12:04PM
Hi Frank,
I suppose you mean the free flooding ports along the topsides.
If you hold the hull up to a light, you should be able to look right through. Otherwise paint the inside flat black so that you do not see any light objects (such as the pressure container and linkages) shining through. Rgds, RB
I suppose you mean the free flooding ports along the topsides.
If you hold the hull up to a light, you should be able to look right through. Otherwise paint the inside flat black so that you do not see any light objects (such as the pressure container and linkages) shining through. Rgds, RB
Subject | Written By | Posted |
---|---|---|
maybe a silly question .... | franck edet | 07/16/2002 12:22AM |
Re: maybe a silly question .... | KIP PAGE | 07/16/2002 07:59PM |
Re: maybe a silly answer... | Rainer Bruns | 07/17/2002 11:55AM |
Re: maybe a silly answer... | KIP PAGE | 07/18/2002 05:00PM |
Re: maybe a silly answer... | KIP PAGE | 07/18/2002 05:14PM |
Re: Type VII C model | Charla Anaya | 07/20/2002 10:13PM |
Re: Type VII C model | KIP PAGE | 07/21/2002 02:38AM |
Re: maybe a silly question .... | Rainer Bruns | 07/17/2002 12:04PM |
Re: maybe a silly question .... | Franck Edet | 07/17/2002 12:55PM |
Re: maybe a silly question .... | Rainer Bruns | 07/17/2002 02:40PM |
Re: maybe a silly question .... | Joe Costa | 09/18/2002 08:08AM |