Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
It's all relative...
Posted by:
Jeff Herne
()
Date: February 07, 2006 08:33PM
Armor modelers put interiors in tanks, aircraft modelers put details into fuselage interiors then close them up. Car modelers detail engines then close the hoods.
It's all relative. If you scrutinize a 1/72 Type VII up close and personal, you'll see details of the pressure hull, especially if you add a brass deck and/or open the limber holes (obviously). If you're building a diorama and showing torpedoes being loaded (using the White Ensign set), or a dockyard repair diorama like the one at the 2005 IPMS Nats, then you see details.
If you install a CMK interior set, you can open the hull up a little further and see lots of details.
As is the case with all resin manufacturers, price is based on the costs of resin, rubber, pattern, and a profit. No resin company deliberately tries to rake your wallet over the coals. If they did (and there's been a few, trust me), they wouldn't be in business for long.
Yankee has a fine reputation for quality products, especially in the 1/350 resin ship arena (targets to you fellas).
Jeff
It's all relative. If you scrutinize a 1/72 Type VII up close and personal, you'll see details of the pressure hull, especially if you add a brass deck and/or open the limber holes (obviously). If you're building a diorama and showing torpedoes being loaded (using the White Ensign set), or a dockyard repair diorama like the one at the 2005 IPMS Nats, then you see details.
If you install a CMK interior set, you can open the hull up a little further and see lots of details.
As is the case with all resin manufacturers, price is based on the costs of resin, rubber, pattern, and a profit. No resin company deliberately tries to rake your wallet over the coals. If they did (and there's been a few, trust me), they wouldn't be in business for long.
Yankee has a fine reputation for quality products, especially in the 1/350 resin ship arena (targets to you fellas).
Jeff
Subject | Written By | Posted |
---|---|---|
My comments on YKM pressure hull set | Einsamer Wolf | 02/04/2006 07:50PM |
Re: My comments on YKM pressure hull set | Jess | 02/05/2006 07:10PM |
It's all relative... | Jeff Herne | 02/07/2006 08:33PM |
Re: It's all relative... | Rainer Bruns | 02/07/2006 10:51PM |
Re: It's all relative... | Jeff Herne | 02/08/2006 10:53PM |
Re: It's all relative... | Einsamer Wolf | 02/08/2006 05:23AM |
Re: It's all relative... | Jeff Herne | 02/08/2006 10:49PM |
Re: It's all relative... | Einsamer Wolf | 02/08/2006 11:55PM |
Re: It's all relative... | Jess | 02/09/2006 02:13AM |
Re: It's all relative... | Einsamer Wolf | 02/09/2006 02:55AM |
Re: My comments on YKM pressure hull set | Mike Mamula | 02/18/2006 06:25PM |