General Discussions  
This is the place to discuss general issues related to the U-boat war or the war at sea in WWII. 
Re: wotan steel
Posted by: Scott Sorenson ()
Date: June 02, 2012 02:35PM

Mark,
Here is some information that I have of the material that the hull is made out of. This is for only the Type IXC boats.

The specification for the pressure hull plating and frames calls for a tensile strength of 74000 psi with a yield point of 51300 psi. The steel is known as No. 52: the specification for plates is KM 9104, and for frames is KM 9103.

In addition to the dished end bulkheads of cast steel, four other dished cast bulkheads are fitted, dividing the pressure hull into five pressure compartments. These bulkheads are 22mm thick: but material specifications, while unknown, it is believed to be German cast steel 45.81 per KM 9106.

I hope this helps you out.

Scott

Options: ReplyQuote


Subject Written By Posted
wotan steel mark 12/31/2000 04:36PM
RE: wotan steel Steve Cooper 12/31/2000 06:30PM
RE: wotan steel Rainer Bruns 01/01/2001 10:49PM
RE: wotan steel kpp 01/02/2001 04:08PM
RE: wotan steel FAlmeida 01/02/2001 09:44PM
RE: wotan steel E. Dalder 01/04/2001 12:40AM
RE: wotan steel Rainer Bruns 01/04/2001 05:27AM
RE: wotan steel mark 01/07/2001 03:46PM
Re: wotan steel Ken Evans 05/26/2012 03:53AM
Re: wotan steel BHenderson 05/26/2012 10:57PM
Re: wotan steel Scott Sorenson 06/02/2012 02:35PM


Your Name: 
Your Email: 
Subject: 
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
 **     **  **     **  **         *******   ********  
 **     **  **     **  **        **     **  **     ** 
 **     **  **     **  **        **         **     ** 
 **     **  **     **  **        ********   ********  
 **     **   **   **   **        **     **  **        
 **     **    ** **    **        **     **  **        
  *******      ***     ********   *******   **