Turning a brass barrel for the deck gun
Posted by: Einsamer Wolf ()
Date: December 05, 2002 02:14PM

How does one turn a brass barrel. I am thinking one needs a lathe do to do this. I do not have a lathe. Any suggestions or technique on how to turn a brass barrel. As I am sure you might guess, it is to replace the barrel provided in Amati's 1:72 U Boot.

Best Wishes,

Einsamer WOlf



Subject Written By Posted
Turning a brass barrel for the deck gun Einsamer Wolf 12/05/2002 02:14PM
Re: Turning a brass barrel for the deck gun joe brandt 12/06/2002 02:08AM
Re: Turning a brass barrel for the deck gun J.Brennan 12/06/2002 03:32AM
Re: Turning a brass barrel for the deck gun Einsamer Wolf 12/06/2002 06:40AM
Re: Turning a brass barrel for the deck gun joe brandt 12/06/2002 08:50PM
Re: Turning a brass barrel for the deck gun J.Brennan 12/06/2002 09:02PM
Re: Turning a 8.8 cm gun barrel Charla Anaya 12/08/2002 12:35AM