Modeling and schematics
Looking for schematics or helpful tips on modeling? This might be the place for you to share your ideas.
Turning a brass barrel for the deck gun
Posted by:
Einsamer Wolf
()
Date: December 05, 2002 02:14PM
How does one turn a brass barrel. I am thinking one needs a lathe do to do this. I do not have a lathe. Any suggestions or technique on how to turn a brass barrel. As I am sure you might guess, it is to replace the barrel provided in Amati's 1:72 U Boot.
Best Wishes,
Einsamer WOlf
Best Wishes,
Einsamer WOlf
Subject | Written By | Posted |
---|---|---|
Turning a brass barrel for the deck gun | Einsamer Wolf | 12/05/2002 02:14PM |
Re: Turning a brass barrel for the deck gun | joe brandt | 12/06/2002 02:08AM |
Re: Turning a brass barrel for the deck gun | J.Brennan | 12/06/2002 03:32AM |
Re: Turning a brass barrel for the deck gun | Einsamer Wolf | 12/06/2002 06:40AM |
Re: Turning a brass barrel for the deck gun | joe brandt | 12/06/2002 08:50PM |
Re: Turning a brass barrel for the deck gun | J.Brennan | 12/06/2002 09:02PM |
Re: Turning a 8.8 cm gun barrel | Charla Anaya | 12/08/2002 12:35AM |