Technology and Operations
This forum is for discussing technological & operational matters pertaining to U-boats.
Re: Hull Thickness
Posted by:
Rainer Bruns
()
Date: February 27, 2003 03:13AM
Hi Scott,
By the time the boats got to Portsmouth NH and got measured and remeasured by US Naval Eng's in '45, they must have lost 1/2 mm to rust and other wear and tear. :-)) German KM specs were 18.5mm thickness on that plate. Rgds, RB
By the time the boats got to Portsmouth NH and got measured and remeasured by US Naval Eng's in '45, they must have lost 1/2 mm to rust and other wear and tear. :-)) German KM specs were 18.5mm thickness on that plate. Rgds, RB
Subject | Written By | Posted |
---|---|---|
Hull Thickness | Wayne Hendrix | 02/26/2003 12:20AM |
Re: Hull Thickness | Rainer Bruns | 02/26/2003 02:37AM |
Re: Hull Thickness | ROBERT M. | 02/26/2003 03:43AM |
Re: Hull Thickness | Rainer Bruns | 02/26/2003 04:40AM |
Re: Hull Thickness | ROBERT M. | 02/27/2003 11:21PM |
Re: Hull Thickness | Rainer Bruns | 02/28/2003 01:17AM |
Re: Hull Thickness | ROBERT M. | 03/01/2003 01:38AM |
Re: Hull Thickness | Rainer Bruns | 03/01/2003 04:02AM |
Re: Hull Thickness | ROBERT M. | 03/01/2003 05:16AM |
Re: Hull Thickness | Scott | 02/26/2003 08:58PM |
Re: Hull Thickness | Rainer Bruns | 02/27/2003 03:13AM |
Re: Hull Thickness | Scott | 02/27/2003 07:54PM |
Re: Hull Thickness | Rainer Bruns | 02/27/2003 09:40PM |
Re: Hull Thickness | ROBERT M. | 02/27/2003 10:26PM |
Re: Hull Thickness | Rainer Bruns | 02/28/2003 01:08AM |
Re: Hull Thickness | Scott | 02/28/2003 07:40PM |